Software Upgrade - Kodicom KSR816 User Manual

1. KSR816 Guide
7. System Setup
[Site Code]
�You can assign an ID code to the system to
make it recognizable when multiple systems
are connected through network.
�The Site Code comprises 6 digits. When
entering Site Code, you can enter a
maximum of 6 digits. Default is "000001"
�Use the mouse or the directional keys to type
in the Site Code. Once you select [OK]
button, the new Site Code will apply
immediately.
[Figure 7-8. Date Type setup]
[Figure 7-9. Date/Time setup]
4 0
[Figure 7-7. Side Code setup]
[Date Type]
�You can change the date display format.
�Available date format is listed below:
yyyy/mm/dd, yyyy-mm-dd, yyyy.mm.dd
mm/dd/yyyy, mm-dd-yyyy, mm.dd.yyyy
dd/mm/yyyy, dd-mm-yyyy, dd.mm.yyyy
[Time Setup]
�You can change the date and time.
�Check the time zone of your region, then use
the mouse wheel or the jog/shuttle to set the
[Time Zone].
�To change year/month/day and time, use
the mouse or the directional keys on the
system to highlight the option you wish to
change, then use the mouse wheel or the
jog/shuttle to change the option. If Daylight
Saving applies in your region, select the
[Daylight Saving] option.

7.3.3 Software Upgrade

�In [Software Upgrade] menu, you can
[Package Select]
[Figure 7-10. Software Upgrade]
[Upgraded Version]
�After a portable storage device is
[Figure 7-11. Software Upgrade menu]
[Current Version]
[Caution]
�You can view the current system
�When upgrading is in progress, do not
switch off the system or unplug the
�Check to make sure the upgrade
portable storage device containing the
upgrade package until the upgrade is
complete. Otherwise, the system may
malfunction.
4 1
1. KSR816 Guide
7. System Setup
update your system program to new
software versions when they become
available.
�You can upgrade the system program
by using a portable storage device to be
recognized by KSR816. The upgrade
package must be in a folder called
"upgrade". Connect the storage device
containing an upgrade package to the
USB port, then press [Select]. The
system will display the number of
packages found.
connected, you can select the [Upgrade
Version] using the mouse wheel or the
jog/shuttle on the system.
program version.
package version is better than the
current version, then select [Start] to
begin the upgrade.