Kodicom KSR816 User Manual page 37

1. KSR816 Guide
7. System Setup
[Figure 7-38. Selecting HDD Management]
[Figure 7-39. HDD table]
5 4
�시스템에 장착된 HDD 디스크를 초기화 시킬 경
우"HDD Mangement"선택 후 [OK] 버튼을 클릭합
니다.
�The table shows the system's built-in
HDDs and their information. You can
install up to HDD into the system.
�From the table, you can select the HDD
you wish to format, then select [OK]
button. The system will display a
confirmation message shown in Figure 7-
40
�The system will display a warning message.
To confirm and proceed with formatting the
selected HDD, press [OK] button. To cancel
format and return to HDD table, select
[Cancel] button.
[Figure 7-40. Confirmation message]
�You can view the HDD format progress
through the progress bar.
�The system will restart once the format is
complete.
[Figure 7-41. HDD format prograss]
[Caution]
�Any newly installed HDD must be formatted.
�Formatting will erase all data stored in the selected HDD. Please make sure you have
saved all important data before proceeding with HDD format (see page 27 for details on
saving backup).
5 5
1. KSR816 Guide
7. System Setup