Ford Automobile User Manual page 73

Locks (security)
3. Press any button on a new radio
frequency remote control. A tone
will sound as confirmation. Repeat
this last step for all your radio
frequency remote controls,
including your original ones, within
10 seconds.
4. Switch the ignition back on or
wait for ten seconds without
programming another remote
control to end the programming.
Only the radio frequency remote
controls which you have just
programmed are now able to lock
and unlock the vehicle.
Replacing the remote control
battery
If the range of the transmitter in
the key decreases gradually, the
battery (type 3V CR 2032) should
be replaced.
In addition, on vehicles with a
Message Centre, this message will
appear in the display and the
display warning light illuminates
amber.
See also section Warning/
information messages, page 26
onwards.
72
• Carefully separate the transmitter
unit from the key using a flat object
(e.g. a screwdriver) in the recess on
the back.
• Open the transmitter unit by
separating the retaining clips on the
sides with the flat object.
• Carefully prise out the battery
with the flat object. Fit the new
battery between the contacts with
the (+) sign facing upwards.
Reassemble the transmitter unit in
reverse order.