Ford Automobile User Manual page 71

Locks (security)
Reprogramming the unlocking
function
You can change the unlocking
function so that pressing the
button once deactivates the double
locking and the anti-theft alarm
system and unlocks only the
driver's door. Pressing the
again within 3 seconds also unlocks
the passenger's doors.
To re-programme the function, see
section Settings menu, page 31
onwards, if a message centre is
equipped.
In order to re-programme the
function, press and hold the
buttons simultaneously for at
least four seconds with the ignition
switched off. The direction
indicators will flash twice to
indicate that the unlocking function
has been successfully
re-programmed.
Pressing and holding both buttons
again simultaneously for at least
4 seconds will change the function
back.
70
Locking the vehicle
To activate central locking and arm
the anti-theft alarm system (if
equipped):
button
With the key: Turn the key in the
driver's or front passenger's door to
position
and
With the remote control: Press the
button once.
• On vehicles without double
locking, the direction indicators will
flash twice as confirmation.
.