Ford Automobile User Manual page 145

Roadside emergencies
BULB REPLACEMENT
Always switch off lights and ignition
before replacing any bulb.
Never touch the glass of the bulbs.
Fit only bulbs having a UV filter.
Always replace a faulty bulb with a
new one of the same type. After
replacing a bulb, check that the
lights operate correctly.
Have the headlight
alignment checked after
each replacement of a bulb.
During operation, the bulbs
and their surroundings get
hot. Switch off the lights and let
the bulbs cool down before
replacing them.
Headlights, side lights, direction
indicators
It is necessary to remove the light
assembly to remove any of the
bulbs.
144
Removing the light assembly
1. Open the bonnet.
2. Remove the screws in the light
assembly.
3. Carefully pull out the light
assembly from the side and top clip
and disconnect the wiring
connector.
Note: When installing in the
reverse order, first fix the hook/pin
under the fender to get the right
position for the other locator arms.
Make sure that the side clip
engages properly.