Reference Images - Cover Screw On Handle - Bowflex 220 DUMBBELLS Service Manual

ND-552
12/1/2003
SelectTech Dumbbell Reference Images
reference images
Trouble Shooting
While there are few parts of the SelectTech Dumbbell that are user
serviceable, especially with the dumbbell handle, this is one that can be
handled by a customer. Should one of the small Allen head screws become
loose or is not fully tightened at the factory the customer can tighten this
themselves. It is critical that the customer not remove BOTH screws from
the covers on the handle assembly. There is a spring mechanism behind
the stainless steel plate. As long as one screw is left tight at all times, the
other screw is safe to work on. The customer will need a 2 mm (5/64" will
also work fine) Allen Key to tighten the screw. The screw does not require a
lot of torque, simply snug it down and add ¼ turn.
14