2.2 Configure the Account Settings
check
Note
After entering the above settings, Account1will be available to make calls.
Note : If the SIP server is behind a NAT, you should enable "NAT Traversal" as "STUN" and
then specify a STUN Server. For more details about STUN, please refer to
http://www.voip-info.org/wiki/view/STUN. To learn about NAT, you should refer to
http://www.voip-info.org/wiki/view/NAT+and+VOIP
___________________________________________________________________________________________________________
YEALINK IP PHONE INTEROPERABILITY CONFIGURATION GUIDE
COPYRIGHT © 2001-2009 YEALINK NETWORK TECHNOLOGY CO.,LTD
① Select "Account"
② Select one Account
③
Active
Account
④ Fill in these fields
⑤
Voicemail
code
10
PAGE 4 OF