2.4 Configure the DSS Key as Call Park .................... 5 2.5 Configure the DSS Key as Intercom ..................... 6 3. Auto-configure the Yealink Phone by the Epygi Server ..............7 3.1 Login to Epygi..........................7 3.2 Configure an Extension......................... 7 3.3 Configure the Attached IP line ......................
1.Requirements and Preparation Software image 5.1.x or higher running on the Quadro2x/4x/16x. Software image x.42.x.x or higher running on the Yealink IP Phone. 2. Configure Yealink IP Phone 2.1 Login to WEB management Press the button IP address ...
② Enter Username / Password Note: Phone Model Yealink SIP-T28 in example, the MAC address of Yealink SIP- T28 bind to IP Line 1, Quadro generates a configuration file and places it in its built-in TFTP server.
DHCP server to notify the phone the location of the TFTP server, which is the Quadro. An example of such network configuration is shown in the figure below. Here the LAN of the Quadro, the dedicated DHCP server, and the IP phone are on the same subnet(...
Need help?
Do you have a question about the IP Phone and is the answer not in the manual?
Questions and answers