Hitachi SJ100DN DeviceNet Series Instruction Manual page 5

4
Getting Started
Comparison Summary, Standard vs. DeviceNet Series
The Hitachi SJ100DN DeviceNet Series inverters generally have the same motor control
capability as the standard SJ100 inverters. However, a few important differences do
exist. The addition of DeviceNet network connectivity to Hitachi inverters is accompa-
nied by some changes to the available parameters, functions, front panel keypad, and
intelligent terminals. Together, these changes provide a complete inverter solution with
DeviceNet network capability, while removing some features that are generally unused
in networked applications.
Feature
Front panel speed control
Front panel LEDs for
networking
Front panel door
Analog input terminals
PWM output terminal
Intelligent input terminals
Intelligent input functions
Intelligent output terminals
Intelligent output functions
Digital operator configuration B_89
Network connector on front
panel
Network connector for cable
DeviceNet network settings
Frequency source selection
Analog input settings
Analog output settings
PID control settings
Intelligent input terminal
settings for [4] to [6]
Intelligent output terminal
settings for [AL0] to [AL2]
TIP: When using the standard SJ100 Series manual with your SJ100DN DeviceNet
series inverter, refer to this page for a summary of the exceptions to that manual. Also
note that your SJ100DN inverter comes with its own Quick Reference Guide (QRG).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SJ100 (standard)
Potentiometer, output freq.
—
Half door for programming keys
and control terminals
[H], [O], [OI], [L]
[FM]
[1], [2], [3], [4], [5], [6]
Includes [AT]
[11], [12], [AL0] to [AL2]
Includes [OD]
RS422 or RJ11 modular
—
—
A_01 (selects potentiometer,
control terminal, or F_01)
A_11 to A_16, B_81, C_81, C_82
C_23
D_04, A_71 to A_76, C_44
C_04, C_05, C_06,
C_14, C_15, C_16
C_24, C_33
SJ100DN (DeviceNet)
—
MS – Module Status LED,
NS – Network Status LED
—
—
—
[1], [2], [3] only
Includes [STA], [STP], [F/R],
[DNT], [OPE]
[11], [12] only
—
—
DeviceNet on Phoenix
5-terminal conn., male
DeviceNet on removable Phoenix
5-terminal conn., female
P_41to P_49
A_01 does not exist, so freq.
source is always F_01 or the
DeviceNet network host
—
—
—
—
—