Configuring Drive Parameters - Hitachi SJ100DN DeviceNet Series Instruction Manual

27
SJ100DN Inverter

Configuring Drive Parameters

This section provides details for SJ100DN DeviceNet Series configuration correspond-
ing to Chapter 3, "Configuring Drive Parameters," in the SJ100 Inverter Instruction
Manual.
Hitachi SJ100DN DeviceNet Series inverters have additional parameters and functions
beyond the SJ100 standard set. Also, several parameters that are not needed for a
network-controlled inverter have been removed.
New parameters for SJ100DN DeviceNet Series
• P_41 to P_49 – DeviceNet network settings
Removed parameters (present only in standard SJ100)
• D_04 – Process variable (PV) monitor for PID control
• A_01 – Frequency source selection
• A_11 to A_16, B_81, C_81, C_82 – Analog input settings
• B_89 – Data select for digital operator OPE-J
• A_71 to A_76, C_44 – PID control settings
• C_04, C_05, C_06, C_14, C_15, C_16 – Intelligent output terminal settings for
[4] to [6]
• C_23 – FM signal selection
• C_24, C_33 – Intelligent output terminal settings for [AL0] to [AL2]
New intelligent input terminal functions (not present in standard SJ100)
• [STA] – Start Motor (option code 20)
• [STP] – Stop Motor (option code 21)
• [F/R] – Forward/Reverse (option code 22)
• [DNT] – Select DeviceNet (option code 25)
• [OPE] – Force Operation from Digital Operator (option code 31)
Removed intelligent input terminal functions (present in standard SJ100)
• [AT] – Analog Input Voltage/current Select (option code 16)
Removed intelligent output terminal functions (present in standard SJ100)
• [OD] – Output Deviation for PID Control
The tables in this section list only the new parameters and intelligent inputs for the
SJ100DN DeviceNet Series inverters. Refer to Chapter 3 in your SJ100 instruction
manual for the main set of inverter parameters and intelligent terminal functions.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com