Cylinder Block - Toyota FJ GSJ10 Technical Manual

EG-8
" The cylinder head bolts are positioned below the camshaft journal in the front of the right bank, and holes
are provided in the camshaft journals to allow installation of the bolts. Thus, the front end of the right bank
is shortened, resulting in the overall length of the engine being shorter.
Cylinder Head Bolt
Shortened
Camshaft Journals

4. Cylinder Block

" The cylinder block is made of aluminum alloy.
" The cylinder block has a bank angle of 60 , a bank offset of 36.6 mm (1.441 in.) and a bore pitch of 105.5
mm (4.15 in.), resulting in a compact block in its length and width considering its displacement.
60
ENGINE — 1GR-FE ENGINE
Front
Right Bank Cylinder Head
238EG10
36.6 mm
(1.441 in.)
105.5 mm
(4.15 in.)
View of Top Side
238EG09
238EG11