Toyota FJ GSJ10 Technical Manual page 26

" Engine Specification f
Engine Type
No. of Cyls. & Arrangement
Valve Mechanism
Combustion Chamber
Flow of Intake and Exhaust Gasses
Fuel System
Ignition System
Displacement
Bore Stroke
Compression Ratio
Max. Output (SAE-NET)*
Max. Torque (SAE-NET)*
Oil Capacity p y
Oil Grade
Type
Engine Coolant E i C l
Capacity Capacity
Type Type
Spark Plug p g
Plug Gap
Firing Order
Fuel Octane Rating
Tailpipe Tailpipe
Emission E i i
Regulation Regulation
Evaporative
3
Engine Service Mass* (Reference)
1
* : Maximum output and torque rating is determined using the revised SAE J1349 procedure.
2
* : Similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite, and non-borate coolant
with long-life hybrid organic acid technology. (Coolant with hybrid organic acid technology consists of
a combination of low phosphates and organic acids.)
3
* : The figure shown is the weight of the part including the coolant and oil.
ENGINE — 1GR-FE ENGINE
3
cm (cu. in.)
mm (in.)
1
1
Dry
With Oil Filter
Without Oil Filter
M/T
A/T
DENSO
NGK
mm (in.)
California
Except California
kg (lb)
1GR-FE
6-Cylinder, V Type
24-Valve DOHC, Chain Drive (with VVT-i)
Pentroof Type
Cross-Flow
SFI
DIS
3956 (241.4)
94.0 95.0 (3.70 3.74)
10.0 : 1
178 kW @ 5200 rpm
(239 HP @ 5200 rpm)
377 N m @ 3700 rpm
(278 ft lbf @ 3700 rpm)
6.0 liters (6.3 US qts, 5.3 Imp. qts)
5.2 liters (5.5 US qts, 4.6 Imp. qts)
4.9 liters (5.2 US qts, 4.3 Imp. qts)
ILSAC
TOYOTA Genuine Super Long Life
Coolant or the following*
9.4 liters (9.9 US qts, 8.3 Imp. qts)
9.8 liters (10.4 US qts, 8.6 Imp. qts)
K20HR-U11 (Nickel)
LFR6C11 (Nickel)
1.0 - 1.1 (0.0394 - 0.0433)
1 - 2 - 3 - 4 - 5 - 6
91 or higher
LEVII, SFTP
Tier2-Bin5, SFTP
LEVII, ORVR
166 (366)
2