Advertisement
Quick Links
Instruction Manual
POWER
ALARM
Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc.,
but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc.
for purposes of operating the equipment. Printed in USA.
When ordering parts from Cross Technologies, Inc., be sure to include the equipment
model number, equipment serial number, and a description of the part.
C
T
ROSS
ECHNOLOGIES, INC.
6170 Shiloh Road
Alpharetta, Georgia 30005
(770) 886-8005
FAX (770) 886-7964
Toll Free 888-900-5588
WEB www.crosstechnologies.com
E-MAIL info@crosstechnologies.com
Model 2083-2215
Dual Translator
September 2009 Rev B
MODEL 2083
TRANSLATOR
C
ROSS
T
ECHNOLOGIES INC.
Advertisement
Related Manuals for Cross Technologies 2083-2215
Summary of Contents for Cross Technologies 2083-2215
- Page 1 ALARM Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc., but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc. for purposes of operating the equipment. Printed in USA. When ordering parts from Cross Technologies, Inc., be sure to include the equipment model number, equipment serial number, and a description of the part.
- Page 2 All Cross Technologies, Inc. products are warranted against defective materials and workmanship for a period of one year after shipment to customer. Cross Technologies, Inc.’s obligation under this warranty is limited to repairing or, at Cross Technologies, Inc.’s option, replacing parts, subassemblies, or entire assemblies. Cross Technologies, Inc. shall not be liable for any special, indirect, or consequential damages.
- Page 3 BNC female. Front panel LEDs light when DC power is applied (green) and when a PLL alarm occurs (red). The 2083-2215 is powered by a 100-240 ± 10% VAC power supply and housed in a 1.75” X 19“ X 16”...
- Page 4 1.2 Technical Characteristics TABLE 1.0 2083-2215 Dual Frequency Translator Specifications* EQUIPMENT SPECIFICATIONS* Input Characteristics 75 Ω /12 dB Input Impedance/RL Frequency, 1.725-2.175 GHz Input Level -10 to -30 dBm Input 1 dB compression 0 dBm Output Characteristics 75 Ω/12 dB...
- Page 5 G. Top Cover - There are no serviceable parts inside the product so, the Top Cover should not be removed. If the Top Cover is removed the ground strap and associated screw MUST BE REINSTALLED prior to Top Cover screw replacement. FAILURE TO DO this may cause INGRESS and/or EGRESS emission problems. 2083-2215 Manual- Rev B Page 5 9/08/09...
- Page 6 2.1 Mechanical The 2083-2215 consists of one RF/Controller PCB housed in a 1 RU (1 3/4 inch high) by 16 inch deep chassis. A switching, ± 12, +24, +5 VDC power supply provides power for the assemblies. The 2083-2215 can be secured to a rack using the 4 holes on the front panel.
- Page 7 -10 to -30 dBm output see Table 2.2. see Table 2.2. see Table 2.2.. 47-60 Hz. see Table 2.2. FIGURE 2.1 2083-2215 Rear Panel I/Oʼs TABLE 2.1 J10 Pinouts* TABLE 2.1 J J 10 Function Rx+ (RS-232C) Tx+ (RS-232C) TABLE 2.2 I I nput/Output...
- Page 8 2.4 Installation / Operation 2.4.1 Installing and Operating the 2083-2215, Frequency Translator Section 1. Connect a -30 dBm to -10 dBm signal to IN, J4 (Figure 2.1) 2. Connect the OUT, J5, to the external equipment 3. Connect 100-240 ±10% VAC, 47 - 63 Hz to AC on the back panel.
- Page 9 ROSS ECHNOLOGIES, INC. 6170 Shiloh Road Alpharetta, Georgia 30005 (770) 886-8005 FAX (770) 886-7964 Toll Free 888-900-5588 WEB www.crosstechnologies.com E-MAIL info@crosstechnologies.com Printed in USA 2083-2215 Manual- Rev B Page 9 9/08/09...
Need help?
Do you have a question about the 2083-2215 and is the answer not in the manual?
Questions and answers