Advertisement
Instruction Manual
EXT REF
POWER
Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc.,
but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc.
for purposes of operating the equipment. Printed in USA.
When ordering parts from Cross Technologies, Inc., be sure to include the equipment
model number, equipment serial number, and a description of the part.
ALARM
C
T
ROSS
ECHNOLOGIES, INC.
6170 Shiloh Road
Alpharetta, Georgia 30005
(770) 886-8005
FAX (770) 886-7964
Toll Free 888-900-5588
WEB www.crosstechnologies.com
E-MAIL info@crosstechnologies.com
Model 2083-0312-30036
Dual Translator
MODEL 2083
TRANSLATOR
April 2023, Rev. 0
C
T
ROSS
ECHNOLOGIES INC.
Advertisement
Table of Contents
Related Manuals for Cross Technologies 2083-0312-30036
Summary of Contents for Cross Technologies 2083-0312-30036
- Page 1 ALARM Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc., but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc. for purposes of operating the equipment. Printed in USA. When ordering parts from Cross Technologies, Inc., be sure to include the equipment model number, equipment serial number, and a description of the part.
-
Page 2: Table Of Contents
All Cross Technologies, Inc. products are warranted against defective materials and workmanship for a period of one year after shipment to customer. Cross Technologies, Inc.’s obligation under this warranty is limited to repairing or, at Cross Technologies, Inc.’s option, replacing parts, subassemblies, or entire assemblies. Cross Technologies, Inc. shall not be liable for any special, indirect, or consequential damages. -
Page 3: General
DC power is applied (green), a PLL alarm occurs (red),and the unit detects presence of EXT input (yellow). The 2083-0312-30036 is powered by a 100-240 ±10% VAC power supply and housed in a 1.75” X 19” X 16” 1RU chassis. -
Page 4: Technical Characteristics
19 inch, 1RU standard chassis 1.75”H X 16.0”D Power 100-240 ±10% VAC, 47-63 Hz, 15 watts max *+10 to +40 degrees C; 2000 meters max elevation; 80% max humidity; Specifications subject to change without notice. 2083-0312-30036 Manual- Rev. 0 Page 4 04/25/2023... -
Page 5: Environmental Use Information
G. Top Cover - There are no serviceable parts inside the product so, the Top Cover should not be removed. If the Top Cover is removed the ground strap and associated screw MUST BE REINSTALLED prior to Top Cover screw replacement. FAILURE TO DO this may cause INGRESS and/or EGRESS emission problems. 2083-0312-30036 Manual- Rev. 0 Page 5 04/25/2023... - Page 6 2.0 Installation 2.1 Mechanical The 2083-0312-30036 consists of one RF/Controller PCB housed in a 1 RU (1.75 inch high) by 16 inch deep chassis. A switching, ± 12, +24, +5 VDC power supply provides power for the assemblies. The 2083-0312- 30036 can be secured to a rack using the 4 holes on the front panel.
- Page 7 FIGURE 2.0 2083-0312-30036 Mechanical Assembly 2083-0312-30036 Manual- Rev. 0 Page 7 04/25/2023...
-
Page 8: Front Panel Indicators
-10 to -30 dBm output -10 to -30 dBm input 100-240 ±10% VAC, 10 MHz 47-60 Hz. Ext. Ref. Output FIGURE 2.1 2083-0312-30036 Rear Panel I/Oʼs TABLE 2.1 J10 Pinouts* TABLE 2.1 J10 Pinouts* Function Not Used Not Used Not Used... - Page 9 2.4 Installation / Operation 2.4.1 Installing and Operating the 2083-0312-30036, Dual Translator Section 1. Connect a -10 dBm to -30 dBm signal to IN, J1/J4 (Figure 2.1) 2. Connect the OUT, J2/J5, to the external equipment. 3. Connect 100-240 ±10% VAC, 47 - 63 Hz to AC on the back panel.
- Page 10 ROSS ECHNOLOGIES, INC. 6170 Shiloh Road Alpharetta, Georgia 30005 (770) 886-8005 FAX (770) 886-7964 Toll Free 888-900-5588 WEB www.crosstechnologies.com E-MAIL info@crosstechnologies.com Printed in USA 2083-0312-30036 Manual- Rev. 0 Page 10 04/25/2023...
Need help?
Do you have a question about the 2083-0312-30036 and is the answer not in the manual?
Questions and answers