Advertisement
Quick Links
Instruction Manual
EXT
ALARM
POWER
10MHZ
Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc.,
but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc.
for purposes of operating the equipment.
When ordering parts from Cross Technologies, Inc., be sure to include the equipment
model number, equipment serial number, and a description of the part.
C
T
ROSS
ECHNOLOGIES, INC.
6170 Shiloh Road
Alpharetta, Georgia 30005
(770) 886-8005
FAX (770) 886-7964
Toll Free 888-900-5588
WEB www.crosstechnologies.com
E-MAIL info@crosstechnologies.com
Model 2116-6T4
Test Translator
October 2012, Rev. B
MODEL 2116
TEST TRANSLATOR
C
ROSS
T
ECHNOLOGIES INC.
Advertisement
Related Manuals for Cross Technologies 2116-6T4
Summary of Contents for Cross Technologies 2116-6T4
- Page 1 10MHZ Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc., but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc. for purposes of operating the equipment. When ordering parts from Cross Technologies, Inc., be sure to include the equipment model number, equipment serial number, and a description of the part.
- Page 2 All Cross Technologies, Inc. products are warranted against defective materials and workmanship for a period of one year after shipment to customer. Cross Technologies, Inc.’s obligation under this warranty is limited to repairing or, at Cross Technologies, Inc.’s option, replacing parts, subassemblies, or entire assemblies. Cross Technologies, Inc. shall not be liable for any special, indirect, or consequential damages.
- Page 3 1.1 Equipment Description The 2116-6T4 Test Translator converts 5.845 - 6.425 GHz to 3.62 - 4.20 GHz with a local oscillator at 2.225 GHz. Front panel LEDs provide indication of external 10 MHz (yellow), PLL alarm (red), and DC power (green).
- Page 4 1.2 Technical Characteristics TABLE 1.0 2116-6T4 Test Translator Specifications* Input Characteristics 50 Ω /15 dB (see TABLE 2.2 for connector options) Impedance/Return Loss Frequency 5.845 to 6.425 GHz Noise Figure, max. 20 dB, max gain Input Level -30 to -10 dBm...
- Page 5 2.1 Mechanical The 2116-6T4 consists of one RF PCB housed in a 1 RU (1 3/4 inch high) by 14 inch deep chassis. A switching, ± 12, +24, +5 VDC power supply provides power for the assemblies. The 2116-6T4 can be secured to a rack using the 4 holes on the front panel.
- Page 6 Lights YELLOW when external present from AC power supply. 10MHz reference is active. 10MHZ ALARM POWER DS2 - ALARM LED Lights RED when PLL comes out of lock. FIGURE 2.2 2116-6T4 Front Panel Controls and Indicators 2116-6T4 Manual, Rev. B Page 6 10/30/12...
- Page 7 2.4 Installation / Operation 2.4.1 Installing and Operating the 2116-6T4 Test Translator 1. Connect a -30 dBm to -10 dBm signal to RF INPUT (J101) (Figure 2.1). 2. Connect RF OUT 1 and RF OUT 2 (J102 and J103) to the external equipment.
- Page 8 G. Top Cover - There are no servicable parts inside the product so, the Top Cover should not be removed. If the Top Cover is removed the ground strap and associated screw MUST BE RE-INSTALLED prior to Top Cover screw replacement. FAILURE TO DO this may cause INGRESS and/or EGRESS emission problems. 2116-6T4 Manual, Rev. B Page 8 10/30/12...
- Page 9 ROSS ECHNOLOGIES, INC. 6170 Shiloh Road Alpharetta, Georgia 30005 (770) 886-8005 FAX (770) 886-7964 Toll Free 888-900-5588 WEB www.crosstechnologies.com E-MAIL info@crosstechnologies.com Printed in USA 2116-6T4 Manual, Rev. B Page 9 10/30/12...
Need help?
Do you have a question about the 2116-6T4 and is the answer not in the manual?
Questions and answers