Configuring Your Phone For Sip Mode; Configuring Your Phone For Pstn Mode - Polycom SoundStation Duo User Manual

®
User Guide for the Polycom

Configuring Your Phone for SIP Mode

Configuring Your Phone for PSTN Mode

2
™
SoundStation Duo Conference Phone
If your phone is set up to operate in SIP mode, and isn't part of a large phone
deployment, your phone may not be registered after it's set up. Before you use
your phone, you or your system administrator will need to register it. For
detailed information on how to register your phone after it's set up, see
Tip 44011: Register Standalone SoundPoint IP, SoundStation IP, and Polycom VVX
1500 Phones.
If your phone is set up to operate in PSTN mode, and no initial configuration
has been set, the first time the phone starts, you'll be prompted to enter certain
information. Your phone requires this information to operate properly.
To configure your phone for PSTN use:
After your phone starts for the first time, the Select Country screen
1
automatically displays, as shown next. Use the Down Arrow key to select
the country your phone operates in, and then press the Select soft key.
After you select the country, the Select Language screen displays, as
2
shown next. Use the Down Arrow key to select the language you want
your phone to display, and then press the Select soft key.
Quick
Polycom, Inc.