Lubricating Front Wheel Spindles, Wheel Bearings And Front Axle Pivot - Sabre 1842GV Operator's Manual

Grease
Use grease based on the expected air temperature
range during the service interval.
The following greases are preferred:
• John Deere Moly High Temperature EP Grease.
• John Deere High Temperature EP Grease.
• John Deere GREASE-GARD™.
Other greases may be used are:
• SAE Multipurpose EP Grease with 3 to 5 percent
molybdenum disulfide.
• SAE Multipurpose EP Grease.
• Greases meeting Military Specification
MIL-G-10924C may be used as arctic grease.
Lubricating Front Wheel Spindles, Wheel
Bearings and Front Axle Pivot
Lubricate front wheel spindles (A), wheel bearings (B),
one on each side of tractor, and front axle pivot (C) with
one or two shots of multipurpose grease or an
equivalent.
Turn wheels to distribute grease to spindles.
SERVICE MISCELLANEOUS
Service Miscellaneous - Page 65
50°C
40°C
30°C
20°C
10°C
0°C
- 10°C
- 20°C
- 30°C
- 40°C
- 55°C
Left-Hand Side of Tractor
122°F
104°F
86°F
68°F
50°F
32°F
14°F
- 4°F
- 22°F
- 40°F
- 67°F
TS1417
A
B
M88584
C
M92886