Remove Packaging; 1848Gv And 1848Hv Only - Remove Mower Deck From Side Of Crate; Install Steering Wheel; Remove Tractor From Crate - Sabre 1842GV Operator's Manual

Remove Packaging

CAUTION: Avoid eye injury. Wear eye
protection when removing wire bands. Wire
bands are under tension and could snap
when removed.
Remove plastic and paper.
Remove wire bands (A) from front and rear tires.
1848GV and 1848HV Only - Remove Mower
Deck from Side of Crate
CAUTION: •Mower Deck is heavy. To avoid
injury, use a hoist or safe lifting device when
removing mower deck from crate.
•Mower Blades are sharp. Always wear gloves
when handling mower deck.
1. Remove two bolts (A) from crate.
2. Using a hoist or a safe lifting device, remove mower
deck from crate.

Install Steering Wheel

1. Put front wheels in the straight forward position.
2. Lubricate the steering shaft.
3. Install steering wheel with Sabre logo in the upright
position.
4. Install shoulder bolt (A). Drive bolt in until head of bolt
contacts steering wheel.
5. Install washer and nut (B).
6. Tighten lock nut until it is snug. Do not tighten lock nut
to pull washer or head of bolt into steering wheel.

Remove Tractor from Crate

1. GEAR MODEL: Put transmission shift lever in
N (Neutral).
AUTOMATIC MODEL: Pull out free-wheeling lever (A).
2. Carefully push tractor off crate.
3. Lock park brake.
4. AUTOMATIC MODEL: Push free-wheeling lever (A)
IN before operating tractor.
ASSEMBLY
A
M92883
Assembly - Page 3
A
M88599
A
B
A
M88566
A
M88560