Sun Microsystems Sun StorEdge PCI FC-100 Installation Manual page 25

8. Make sure that the host adapter is recognized by the system.
Use the show-devs command to locate the host adapter directory and the
show-children command to display the FC-AL devices connected to your system.
For example:
ok show-devs
/pci@6,2000
/pci@6,4000
/pci@4,2000
/pci@4,4000
/SUNW,ffb@1d,0
/SUNW,UltraSPARC-II@0,0
/mc@0,0
/pci@1f,2000
/pci@1f,4000
/counter-timer@1f,1c00
/associations
/virtual-memory
/memory@0,0
/aliases
/options
/openprom
/chosen
/packages
/pci@4,4000/SUNW,ifp@4
/pci@4,4000/SUNW,ifp@4/ssd
...
ok select select /pci@4,4000/SUNW,ifp@4
ok show-children
LiD HA --- Port WWN --- --- Disk description ---
1d 1d 5080020000007c22
10 10 21000020370710ac
11 11 2100002037076b25
12 12 2100002037072a4f
13 13 21000020370729fe
14 14 21000020370751a1
15 15 2100002037075299
16 16 2100002037075302
...
In the example,
pci@4,4000/SUNW,ifp@4
Adapter and the disks shown by using the show-children command are in a Sun
StorEdge A5000 array (SENA).
9. Reboot your system using the boot -r command.
SUN SENA
SEAGATE ST19171FCSUN9.0G10789735C05778
SEAGATE ST19171FCSUN9.0G10789735H45113
SEAGATE ST19171FCSUN9.0G10789735D25090
SEAGATE ST19171FCSUN9.0G10789735C59513
SEAGATE ST19171FCSUN9.0G10789735E83001
SEAGATE ST19171FCSUN9.0G10789735E83803
SEAGATE ST19171FCSUN9.0G10789735E83720
is the Sun StorEdge PCI FC-100 Host
1.05P|
Chapter 1 Installation 1-7