Gateway Solo 5100 Maintaining & Troubleshooting page 51

Note:
After adding a new device
such as a network card or
others, reinstall the
Windows NT Service Pack to
update drivers and associated
files.
50 Maintaining and Troubleshooting Your Solo Notebook
4. A window appears stating this program installs PowerProfiler and
CardWizard. Close all other Windows programs before continuing. Click
Next to continue.
5. The next window asks what options to install. Checkmark the boxes for
PowerProfiler and CardWizard. Click
6. Choose the destination directory. The default path is C:\Program
Files\Systemsoft. Click
7. A CardWizard logo window appears. Click
installation window appears. Click
8. The next window states CardWizard cannot be installed if there are cards in
the PCMCIA slots. Remove all cards and click
9. The Select Type of Platform window appears. Click to checkmark the box for
Gateway Solo 5100,
10. The files copy, then a window appears stating the CardWizard readme file
should be viewed. Click
11. Insert disk 2 when prompted. Click
12. Insert disk 3 when prompted. Click
13. Click
Yes or No to view the PowerProfiler readme file.
14. A window appears stating the system should be restarted. Remove the
diskette in drive A: and click
The CardWizard and
Windows NT Service Pack CD
The Service Pack CD-ROM disc contains updates to Windows NT features and for
products operating with Windows NT. Use this CD-ROM to update the
Windows NT install.
Installing Windows NT Service Pack (NT updates)
1. If not already installed, shut down and install the CD-ROM module. Restart
Windows.
.
Next
Next to accept the default.
Next
Next to continue.
then click Next .
to continue.
No
OK .
OK .
. The system restarts with Windows NT.
Finish
PowerProfiler icons appear on the
to continue. A welcome to
to continue.
Yes
Program menu.