Gateway Solo 5100 Maintaining & Troubleshooting page 40

Clearing the check box to enable the PCIC controller properties
4. When the PC Card (PCMCIA) Wizard appears, read the dialog box and click
No , then click Next
5. Click
No then click
6. Follow the PC Card Wizard prompts, then click
7. When asked to shutdown Windows, click
down.
8. Press the Power Button to restart the system.
The figure below shows how your Texas Instruments PCI-1250 CardBus
Controller appears in the Device Manager when properly installed
.
Next again in the following wizard dialog box.
Yes
.
Finish
. Windows shuts the system
Chapter 4: Installing Drivers and Related Software 39