How To Assemble; How To Operate - Royal Vacuum Cleaner Owner's Manual

HOW TO ASSEMBLE

NOTE: To ensure proper operation of the cleaner, verify that the rubber O-ring is in place and tighten all collars.
1. 1a.
To attach the lower handle, align with nozzle
opening in the base of the cleaner (Diagram
1). Push together firmly and turn the knob
clockwise to tighten (Diagram 1a).
3.
3a.
To attach the upper handle, align with
middle section of cleaner and push firmly
into place (Diagram 3). Turn the knob
clockwise to tighten (Diagram 3a).

HOW TO OPERATE

WARNING: FULLY ASSEMBLE BEFORE OPERATING.
1. 2.
FRONT
Plug cord into electrical Tilt the cleaner back before
outlet. Turn power switch you start vacuuming. At the
to the "ON" position. same time, use your foot to
press the nozzle down onto
the carpet.
2. 2a.
To attach the bag, hold the handle and firmly
push into lower handle (Diagram 2). Turn the
top knob counterclockwise to tighten and
snap bag clip onto lower handle (Diagram
2a).
4.
To keep the cord out of the
way while vacuuming, snap
it into the cord clip on the
back of the upper handle.
CORD STORAGE
3.
For tidy cord storage, wrap
cord around upper and
lower cord wraps on back
of cleaner.
6