Operation; Access The Camera - COMPRO NC3230 Installation Manual

Operation

Access the Camera

Find Out the Camera's IP Address
Using the iWizard setup utility to search for your Compro IP camera on the LAN network
is the easiest way to find out your camera's IP address, as the IP address of your camera
will be revealed in the search result.
To start searching for your camera using iWizard, double-click on the iWizard icon
tap Start > Programs > ComproView > iWizard) to launch the iWizard setup utility. Then
select your language and a camera model, and go ahead to scan for all the available
Compro IP surveillance products installed on your LAN network. The scanning generally
takes around 1 minute to complete, and once the scanning completes, you shall see
your Compro IP camera and its IP address on the list. Then you can double-click your
camera on the list to view live camera video right away on the Internet Explorer.
If your camera does not turn up on the list, try performing another search. Or try con-
necting your IP camera directly to your viewing PC, and run iWizard again to manually
configure the camera's IP address.
View Live Camera Video
After you have determined the camera's IP address, you may now:
1. Open the Internet Explorer on your viewing PC.
2. Enter the camera's IP address in the address bar. (e.g. 192.168.0.100)
3. A dialog box that requests the user name and password appears; enter a valid
user name and password, and then press OK. The default user name and pass-
word are both "admin".
4. After valid user name and password are entered, Internet Explorer will prompt
the installation of camera software from "Compro Technology, Inc. ' '
5. Click on the warning message and choose to install the ActiveX. (Compro ActiveX
components only support 32-bit Internet Explorer. Hence, if the viewing com-
14 Operation
(or