Connection To Drainage; Machines With A Drain Pump - Miele WS 5427 MC 23 Operating And Installation Instructions

Installation

Connection to drainage

Machines with a drain pump

The machine drains via a drain pump
with a max. delivery head of 1 metre.
The 1.5 metre long drain hose must not
be kinked as this would restrict drain-
age.
The hook in the end of the drain hose
can be turned or taken off if required.
The drain hose may be connected as
follows:
– Direct into a sink (drain pump version
LP).
Hook the hose over the edge of the
sink and secure . Make sure that the
water can flow away freely to avoid
flooding and to prevent water from
being sucked back into the machine.
– Connected to a plastic drain pipe
with a rubber seal. There is no need
to use a non-return valve.
– Directed into a standpipe, (seal the
hose into the pipe to avoid flooding
in case of the drainpipe being
blocked).
– Directly into a floor drain (gully).
The drain hose can be extended to 5
metres.
The accessories required can be pur-
chased from the Miele Spare Parts
Dept.
For draining the water away with a de-
livery head over 1 metre (and up to a
max. of 1.8 metres) a 2
pump" can be connected. Contact your
Miele Dealer or the Professional Sales
Dept.
48
nd
"Duo-drain