SOYO SY-P4I875P DRAGON 2 User Manual page 140

Is there a way to reprogram my BIOS after an unsuccessful flash?
No other way, you need to send back the BIOS ROM to your nearest SOYO
branch for re-flashing.
I'm using a 400 or 533 MHz FSB CPU, I cannot find the DDR 200MHz
option in the BIOS, why?
An 800 MHz CPU should be used if you want your memory to run at DDR
400 (PC3200).
VGA Issue
I cannot set my VGA to go higher than 16 color (640x 480).
1. Make sure that you have installed the Intel Inf driver.
2. Install/ re-install the VGA driver.
After wake-up from Suspend to RAM or Standby mode, the screen has
no display but I can hear the hard disk operating
Check the VGA card manufacturer for a driver update and VGA BIOS update,
make sure the VGA card supports the Suspend to Ram function.
Audio Issue
How can I disable the on-board Audio?
Go to the SOYO Combo Feature menu in the BIOS setup, then set the
"onboard audio" to disable.
I cannot get the sound working on my system.
1. Check if the speaker wire is connected to the line out connector on
the M/B. Make sure the SPDIF card cable isn't connected the wrong
way around.
2. Check if your speakers are powered on.
3. Install the audio driver supplied on our driver disc.
4. Check BIOS setup if "onboard audio" is enabled.
5. If sound is already installed, check our website for an audio driver
update.
135