VI. Set Disk Mode
The following steps shall be taken to set the disk mode.
1.
Select
6. Set Disk Mode
2.
Select the disk mode to be set in the popup selection box and press
Enter
to confirm.
VII. Set Boot Disk.
The following steps shall be taken to set the boot disk:
1.
In the menu, select
2.
In the validated channel status zone, use the arrow key to select the
boot device and press
Note:
1. The
Set Boot Disk
connected to IDE on motherboard.
2. After the boot disk is set, its status will become
in the menu and press
7. Set Boot Disk
Enter
to confirm.
item appears on condition that no hard disk is
121
Enter
item, press
Enter
Boot
.
to confirm.
to confirm.