3.
In the validated channel status, select the source disk of the mirror
array and then press
4.
In the menu, select
confirm.
5.
In the validated channel status, select the target disk of the mirror
array and then press
6.
In the menu, select
to confirm.
7.
Press
Y
Continue?
Note:
When there is no RAID 1 array, system will prompt user
at the second step, and rebuild cannot continue.
IV. Add Spare Disk
The following steps shall be taken to add the spare disk.
1.
In the menu, select
2.
In menu, select
confirm.
3.
In the validated channel status, select the mirror array and press
Enter
to confirm.
4.
In the menu, select
to confirm.
5.
In the validated channel status, select the spare disk to be added
and press
V. Remove Spare Disk
The following steps shall be taken to remove the spare disk.
1.
In the menu, select
confirm.
2.
The
1. Select Mirror Array: None
3.
In the validated channel status, select the spare disk to be removed
and press
Enter
2. Select Target Disk: None
Enter
3. Start Duplication Process
when asked
The last time rebuild not completed.
4. Add Spare Disk
1. Select Mirror Array: None
2. Select Spare Drive: None
Enter
to confirm.
5. Remove Spare Disk
Enter
to confirm.
.
.
and press
item appears in the menu.
120
and press
Enter
and press
Enter
No enough disks
Enter
to confirm.
and press
Enter
and press
Enter
Enter
and press
to
to
to