Setting Settop Clock Options; Setting The Settop Clock Display - Pioneer passport DCT Service Manual

Selecting Passport DCT Settings
........................................................................................
5 Press the right arrow button to move to the Setting column. The Dynamic Range options
display; the currently selected setting has a bullet in front of it.
6 Press the up or down arrow button to highlight the desired setting.
7 Press the SELECT button to accept the setting. The setting you selected now has a bullet in
front of it.
8 Press the left arrow button and your new selection displays in the Settings column.
9 To exit the Settings menu, press the EXIT button.

Setting Settop Clock Options

You use the Settop Clock preference to specify clock options for your settop. You can specify if you
want the clock to show the channel number, the time of day or both. You can also set the clock
illumination to display all the time or only when the settop is on.

Setting the Settop Clock Display

When the settop is off, the clock always displays the time of day. When the settop is on, you can
choose to display the channel number as well. To do this, you use the Settop Clock preference in the
Settings menu. You have the following options for the clock display:
This clock display option
Time/Channel
Time
Passport DCT Customer Service Guide
90
Does the following
Displays the channel numbers while you are changing
channels; displays the time otherwise
Displays the time of day