Operating Instructions - Omega CL3512 Operating Instructions Manual

Function Switch
The function switch limited to rotate in 180º range, the overlay OUTPUT ºF
refer to scale of the OUTPUT ºC only.
Selecting the Temperature Scale
Readings are displayed in either degrees Celsius(°C) or degrees
Fahrenheit(°F). When the thermometer is turned on, it is set to the temperature
scale that was in use when the thermometer was last turned off. To change the
temperature scale, press the "°C/°F"key.
Selecting the Display Resolution
The thermometer allows two choices of resolution:
High resolution: 0.1°C or 0.1°F
Low resolution: 1.0°C or 1.0°F
To select the alternate display resolution, press the corresponding "0.1°/1°"
key.
Back-Light and Data-Hold Switch ( >2sec),(
Press this button briefly to activate DATA-HOLD mode. The "
is displayed.
Press this button for 2 seconds to turn the Back-Light on. As this also
activates the DATA-HOLD mode, briefly press the button to return to normal
display. To turn the Back-Light off press again for 2 seconds.

OPERATING INSTRUCTIONS

H
4
):
H " annunciator