Malfunction Model; Kickstand; Carrier - Giant Twist Owner's Manual

Hide thumbs Also See for Twist:
Table of Contents

Advertisement

(5)

Malfunction model:

If the LED lights flash while riding, it means that there is a possible malfunction.
LED Status
L1 blinking
The battery has completely run down.
L2 blinking
Torque sensor malfunction
L3 blinking
Driver overheating
L4 blinking
Motor malfunction
The power assist is not available when indicator is blinking.
If LED lamp does not light up during operation, check if the battery is charged and securely mounted.
C. Kickstand
D. Carrier
If you carry luggage on the carrier, make sure everything is securely fixed and free from the rear wheel, chain, etc. Total
weight of the luggage must not exceed 15 kg (35lbs). The carrier is not equipped with rack straps; ask your dealer for straps
so luggage can be carried safely. Never carry a passenger. You may carry a child as long as it is placed in a proper child
seat that is fitted securely to the bicycle.
L 1 L 2 L 3 L 4
What's Happening
The
Twist
bike is equipped with a retractable kick stand for parking and
storage while not in use. Always use the kickstand when parking or storing
your
Twist
bike. Do not lean it against anything (wall, post, fence, etc.) or lay it
on its side. To park bike, push down the kickstand with your foot and move the
bike backward until the support locks.
To ride bike again, put your foot in front of the kick stand and move the bike
forward. Press the kickstand upward into it's retracted position.
Solution
Recharging is required.
Reset the power.
If the symptom persists even after
resetting, bring your
Twist
Authorized Giant retailer.
16
bike to an

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents