Page 1
Atlas INSTRUCTION MANUAL BENUTZERHANDBUCH MANUEL D’UTILISATION MANUAL DE INSTRUCCIONES INSTRUKCJA OBSŁUGI ISTRUZIONI D’USO РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ Simp 说明书...
Page 2
3) DC Power Port 4) Channel Selector Switch 5) Test / Shutter Button 6) Flash Hot Shoe Connection 7) Camera Hot Shoe Connection 8) Locking Ring Atlas Atlas 9) Flash in/out Port 10) Flash out Port 11) Antennae STATUS STATUS...
Connecting a flash or studio light by PC sync 3.Make sure all Phottix Atlas transceivers, both on the camera strobes or take a photo when the Phottix Atlas is used as facturers) are not triggered by the center hot shoe contact 1.Turn off the flash/strobe and the Phottix Atlas transceiver.
Page 4
5.Set the camera and flash (if used) to Manual mode. 1.Turn off the camera and the Phottix Atlas transceiver. three Atlas transceivers – one on the camera, one to be used 4.Connect the opposite end of the cable to the flash’s PC * It is not unusual for the flash to discharge once after turning 2.Attach the correct Phottix Atlas Shutter Release Cable for...
Page 5
The Atlas transceiver can be set to only transmit signals, not 5.Turn on the camera and Phottix Atlas transceiver. 8. Using a Phottix Atlas transceiver in hand will allow for re- 5.Repeat steps 1-4 for additional cameras, making sure the receive them.
Envi- ronmental objects, such as large buildings or walls, trees, fences, or cars can also aff ect performance. For best results position the Atlas so the antenna is vertical. If you fi nd your...
Need help?
Do you have a question about the Atlas and is the answer not in the manual?
Questions and answers