Security; Radio Disable - Vertex Standard VXD-720 Operating Manual

Security
You can enable or disable any radio in the system.
For example, you might want to disable a stolen
radio, to prevent the thief from using it, and enable
that radio, when it is recovered.
NOTE: Performing Radio Disable and Enable is
limited to radios with these functions en-­
abled. Check with your dealer or system
administrator for more information.
Radio Disable
Procedure:
Use the programmed Radio Disable button.
1 Press the programmed Radio Disable button.
2 or to the required alias or ID and press
to select.
3 The display shows "Radio Disable: <Subscriber
Alias or ID>
4 Wait for acknowledgment.
5 If successful, a tone sounds and the display
shows "Radio Disable Successful
OR
If not successful, a tone sounds and the display
shows "Radio Disable Failed
OR
Procedure:
Use the menu.
1 to access the menu.
2 or to "Contacts
The entries are alphabetically sorted.
3 or to the required alias or ID and press
to select.
OR
or to "Manual Dial
lect.
Key in the subscriber alias or ID and press
4 or to "Radio Disable
select. The LED blinks green.
5 The display shows "Radio Disable: <Subscriber
Alias or ID>
6 Wait for acknowledgment.
7 If successful, a tone sounds and the display
shows "Radio Disable Successful
OR
If not successful, a tone sounds and the display
shows "Radio Disable Failed
Do not press during the Radio Disable
operation as you will not get an acknowledgement
message.
to select.
to se-­
.
to
83