Sending A Quick Text Message With The One Touch Access Button - Vertex Standard VXD-720 Operating Manual

Press to move one space to the left.
Press or the
the right.
Press the key to delete any unwanted
characters.
6 Press once message is composed.
7 or to "Send
message.
OR
or to "Save
message to the Drafts folder.
OR
[ BACK ] to edit the message.
[ BACK ] again to delete the message or save it
to the Drafts folder.
8 or to the required alias or ID and press
to select.
OR
or to "Manual Dial
select.
Key in the subscriber alias or ID and press
9 The display shows "Text Message: <Subscriber/
Group Alias or ID>"
being sent.
10 If the message is sent successfully, a tone
sounds and the display shows Message Sent.
72
key to move one space to
to send the
to save the
to
.
OR
If the message cannot be sent, a low tone
sounds the display shows Message Send
Failed.
If the text message fails to send, the radio returns
you to the "Resend" option screen (see Managing
Fail-­to-­Send Text Messages on page 74).
Sending a Quick Text Message with the One
Touch Access Button
Procedure:
1 Press the programmed One Touch Access but-­
2 The display shows "Text Message: <Subscriber/
Group Alias or ID>
being sent.
3 If the message is sent successfully, a tone
sounds and the display shows "Message Sent
OR
If the message cannot be sent, the display
shows "Message Send Failed
If the text message fails to send, the radio returns
you to the "Resend" option screen (see Managing
Fail-­to-­Send Text Messages on page 74).