Receiving An Emergency Alarm - Vertex Standard VXD-720 Operating Manual

Your radio supports three Emergency A larms:
In addition, each alarm has the following types:
Regular
shows audio and/or visual indicators.
Silent
any audio or visual indicators. Radio receives
calls without any sound through the radio's
speaker, until you press the PTT button to initi-­
ate the call.
Silent with Voice
signal without any audio or visual indicators, but
allow incoming calls to sound through the ra-­
dio's speaker.
Only ONE of the Emergency Alarms above can be
assigned to the programmed Emergency button.
Receiving an Emergency Alarm
Procedure:
1 When receiving an Emergency Alarm, the dis-­
play shows the Emergency icon, the number of
alarms received, and "Alarm Rcvd
nates with the alias or ID of the sender.
2 A tone sounds and the LED blinks red.
3 Your radio automatically acknowledges the
Emergency A larm (if enabled).
When your radio receives an Emergency Alarm, it
displays the Emergency Alarm received indications
until acknowledgement is sent (if enabled) and you
exit the Emergency mode.
You will not be able to receive any other indications
or displays for any other calls until you exit the
Emergency Alarm received screen.
NOTE: Press , then press Emergency Off
button immediately to clear the Emergency
Alarm received indications and exit Emer-­
gency mode.
Press , then press Emergency On but-­
ton immediately to toggle the Emergency
feature between hidden or shown.
-­
65