Table of Contents
Advertisement
OR
Procedure:
Use the menu.
1
to access the menu.
2
or
to "Contacts
3
or
to the required subscriber alias or
ID and press
to select.
OR
or
to "Manual Dial
lect.
If there was previously dialed ID, the ID appears
along with a blinking cursor. Use the keypad to
edit the ID. Press
OR
or
to "Manual Dial
lect. Key in the subscriber alias or ID and press
.
4
or
to "Radio Check
lect.
48
to select.
to se-
to select.
to se-
to se-
5 The display shows "Radio Check: <Subscriber
Alias or ID>
progress. The LED lights up solid green.
6 Wait for acknowledgement.
7 If the target radio is active in the system, a tone
dio Available
OR
If the target radio is not active in the system, a
get Radio Not Available
8 Radio returns to the subscriber alias or ID
screen.
If the
button is pressed when the radio is
waiting for acknowledgement, a tone sounds, and
the radio terminates all retries and exits Radio
Check mode.
Target Ra-
Tar-
Advertisement
Table of Contents
