Feeding Motion Of Needle Feed (Only On Pfaff 1181) - Pfaff 1181 Adjustment Manual

Adjustment
13 Feeding motion of needle feed
.05.08
● Bring the needle bar into the position 0.6 mm past t.d.c.
● Turn eccentric 1 (screws 2) until the adjustment pin 3 locks into place.
13 - 10
Requirement
When the longest stitch length is set and the needle bar is positioned 0.6 mm past b.d.c.,
the needle should not move when the reverse-feed key 4 is operated.
3
Fig. 13 - 09
(only on PFAFF 1181)
1
2
3