NEC Single Line User Manual page 5

S / S
TA T I O N Y S T E M
➤
Lift handset.
➤
Dial Speed Dial code 77.
➤
Dial Speed Dial Memory location:
➤
Station Speed Dial 80~99.
➤
System Speed Dial 00~79.
➤
Converse.
T Q
R U N K U E U I N G
Upon receiving busy tone when all outside lines are busy:
➤
Dial Trunk Queue set code 78.
➤
Replace handset.
NOTE: When an outside line is available, your telephone will ring; lift handset and place call (no need to
dial Trunk Access code).
H
o l d i n g C a l l s
E
X C L U S I V E
With a call in progress:
➤
Press Hookswitch.
NOTE 1: Replacing the handset when a call is on hold will cause the held call to immediately ring your
station.
NOTE 2: Once a call is placed on hold, the telephone can be used to place another internal or outside call or
access a feature (i.e. Call Pickup). Replace handset to return to the original party.
T
r a n s f e r r i n g C a l l s
With a call in progress:
➤
Press Hookswitch.
➤
Dial station number.
➤
Announce call (optional.)
➤
Replace handset.
NOTE 1: If the called station is busy, replacing handset will initiate a camp-on. An unanswered camp-on
or ring transferred call will recall to your telephone after a preprogrammed time interval.
NOTE 2: To return to the original party, press Hookswitch twice.
NOTE 3: To transfer a call directly to a personal voice mailbox, dial 7 after dialing the station number.
S
P E E D
H
O L D
D
I A L
3