Page 1
No representation is made that this manual is complete or accurate in all respects and NEC Business Solutions Ltd shall not be liable for any errors or omissions.
Page 2
Check with your Supplier / System Administrator and make a note of any differences. Using Your Telephone This User Guide describes general analogue Single Line Telephone (SLT) procedures. Refer to the User Guide included with to your specific SLT for details on additional key functions.
Page 3
Extension Number Your call will ring or voice-announce. If you hear ringing, wait for an answer. If you hear a beep, begin speaking. Dialling “1” changes voice/ring mode. (in case the destination is Key Telephone) Placing Calls Quickly Abbreviated Dialling <for Outside>...
Page 4
<Callback> <Camp On> In case of Intercom Call, when you hear ringing, wait for the called party to answer. In case of Outside Call, when you hear Dial Tone, begin telephone number dialling. <Callback> In case of Intercom Call, when your phone starts the ringing, lift handset and wait for the called party to answer.