Using The Stopwatch Feature; The Transmitter - Omron HR-100CAN Instruction Manual

STOPWATCH FEATURE
1. Press the MODE button to select
the Stopwatch operating mode.
2. Press the ST/SP button to start the stopwatch.
3. Press the ST/SP button to stop the stopwatch.
4. Press and hold the SET b utton to reset
the stopwatch.

THE TRANSMITTER

The transmitter counts your heartbeat and sends the
data to the receiver.
ATTACHING THE TRANSMITTER
Attach the strap to the transmitter by inserting the
strap clip through the backside of the corresponding
shaped hole on the transmitter. Gently push down
to secure.
1. Moisten the conductive pads on the backside of
the transmitter with water or a conductive gel to
ensure a solid contact.
2. Strap the transmitter across your chest. Adjust the
strap until the transmitter sits snugly belo w your
pectoral muscles for an accurate heart rate signal.
USING THE
CONDUCTIVE PADS
11