Searching For A Scene; Viewing Information About The Disc - Sony DVP-NC600 Service Manual

Repeating a specific portion (A-B
Repeat Play)
You can play a specific portion of a title,
chapter, or track repeatedly. (This function is
useful when you want to memorize lyrics,
etc.)
1 2 3
4 5 6
7 8 9
CLEAR
0
A-B
1
During playback, when you find the
starting point (point A) of the portion to
be played repeatedly, press A-B.
The Control Bar appears.
The starting point (point A) is set.
A13 – 0:27:34 B
2
When you reach the ending point (point
B), press A-B again.
The set points are displayed and the
player starts repeating this specific
portion.
"A-B" appears on the front panel display
during A-B Repeat Play.
To return to normal play
Press CLEAR.
Selecting a Chapter or
Track
You can select a chapter or track directly by
inputting the chapter or track number.
1 2 3 Number
4 5 6
buttons
7 8 9
0
ENTER
ENTER
1
Input the chapter or track number
using the number buttons during
playback.
For example, to select chapter 12, press 1,
then 2.
12 ( 30 )
xWhen playing a DVD
(CHAPTER)
xWhen playing a VIDEO CD (without
PBC functions)
(TRACK)
xWhen playing a CD
(TRACK)
If you make a mistake
Cancel the number by pressing CLEAR,
then press a correct number.
Notes
• You can set A-B Repeat Play for only one specific
section.
• When you set A-B Repeat Play, the settings for
Shuffle Play, Repeat Play, and Program Play are
canceled.
• You cannot set the start point (point A) on one disc
and ending point (point B) on other disc.
2
Press ENTER.
The player starts playback from the
selected chapter or track.

Searching for a Scene

Searching for a Particular
Point on a Disc
motion Play)
You can locate a particular point on a disc
quickly by monitoring the picture or playing
back slowly.
4 5 6
7 8 9
0
H
Note
Depending on the DVD/VIDEO CD, you may not be
able to do some of the operations described.
Locating a point quickly by playing a
disc in fast forward or fast reverse
(Scan)
y while playing a disc.
Press or
When you find the point you want, press H
to return to normal speed.
Each time you press
scan, the playback speed changes. Three
speeds are available. With each press the
indication changes as follows:
Playback direction
(DVD/CD only) t 1
x2 B
43 44

Viewing Information About the Disc

Checking the Playing
Time and Remaining Time
on the Front Panel
Display
You can check information about the disc,
such as the remaining time, total number of
titles of a DVD, or tracks of a CD or VIDEO
CD, using the front panel display (page 10).
1 2 3
4 5 6
7 8 9
0
TIME/TEXT
Press TIME/TEXT.
Each time you press TIME/TEXT while
playing the disc, the display changes as
shown in the following chart.
45 46
1-10
Opposite direction
x2b (DVD only) t 1
(Scan, Slow-
The x2B/x2b playback speed is about twice
the normal speed. The 2M/2m playback
speed is faster than 1M/1m.
Watching frame by frame (Slow-
motion Play)
You can use this function only for DVDs or
VIDEO CDs. Press
y
/
player is in pause mode. To return to the
normal speed, press H.
Each time you press
Slow-motion Play, the playback speed
changes. Two speeds are available. With
each press the indication changes as follows:
Playback direction
2y y 1y
Opposite direction (DVD only)
y 1
2
The 2y/2 playback speed is slower than
1y/1 .
y during
or
t 2
M M
When playing a DVD
Playing time and current disc, title and chapter
number
Remaining time of the current title
Playing time and
number of the current chapter
Remaining time of the current chapter
Text
When playing a VIDEO CD (without
PBC functions) or CD
Playing time and current disc, track and
index number
Remaining time of the current track
Playing time of the disc
Remaining time of the disc
Text
z
When playing VIDEO CDs with PBC functions,
the scene number and the playing time are displayed.
t 2
m m
y when the
or
y during
or