Sony DVP-NC600 Service Manual page 13

CD/DVD player
COAXIAL OPTICAL R – AUDIO – L VIDEO
1 Y
2 P B
PCM/DTS/
DOLBY DIGITAL
S VIDEO P
DIGITAL OUT R
LINE OUT
OUT
COMPONENT
VIDEO OUT
Coaxial digital cord
B-2
(not supplied)
Stereo audio cord
(not supplied)
COAXIAL OPTICAL
or
PCM/DTS/
DOLBY DIGITAL
or
DIGITAL OUT
Optical digital cord (not supplied)
Remove jack cap before
connecting.
to coaxial or optical digital input
[Speakers]
Front
Stereo amplifier (receiver)
(L)
Front
(R)
l: Signal flow
CD/DVD player
COAXIAL OPTICAL R – AUDIO – L VIDEO
1 Y
2 P
B
PCM/DTS/
DOLBY DIGITAL
S VIDEO P R
DIGITAL OUT LINE OUT
OUT
COMPONENT
VIDEO OUT
Coaxial digital cord
C-2
(not supplied)
COAXIAL OPTICAL
or
PCM/DTS/
or
DOLBY DIGITAL
DIGITAL OUT
Optical digital cord (not supplied)
Remove jack cap before
connecting.
to coaxial or
optical digital
input
[Speakers]
Dolby Surround amplifier (receiver)
Rear Rear
(L) (R)
Subwoofer Center
l: Signal flow
* When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear speakers and a
subwoofer.
B-1
R – AUDIO – L VIDEO
(red)
1
2
(white)
LINE OUT
(white) (red)
to audio input
MD deck/DAT deck
C-1
Stereo audio cord
(not supplied)
R – AUDIO – L VIDEO
(red)
1
2
(white)
LINE OUT
(white) (red)
to audio input
[Speakers]
Front
Front
(L) (R)
Rear*
(mono)
C Connecting to a Dolby Surround (Pro Logic) decoder amplifier (receiver) and
3 to 6 speakers
This connection will allow you to enjoy the surround effects of the Pro Logic decoder on your
amplifier (receiver). If you have an AV amplifier (receiver) equipped with a Dolby Digital or
DTS decoder, refer to page 26.
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or
multichannel audio (Dolby Digital) discs.
Pro Logic uses a minimum of 3 speakers (front L and R, and rear (monaural)). The surround
effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer) are used.
If your amplifier (receiver) has R and L audio input jacks only, use
(receiver) has a digital input jack, use
xRecommended surround sound effects using this connection with your amplifier (receiver).
• Dolby Surround (Pro Logic) (page 66)
z
For correct speaker setting location, please refer to the operating instructions of the amplifier (receiver).
23 24
Connecting to an AV amplifier (receiver) with a digital input jack having a
D
Dolby Digital or DTS decoder, and 6 speakers
This connection will allow you to use the Dolby Digital or DTS decoder function of your AV
amplifier (receiver). You are not able to enjoy the TVS sound effects of the player.
xRecommended surround sound effects using this connection with your amplifier (receiver).
• Dolby Digital (5.1ch) (page 66)
• DTS (5.1ch) (page 66)
z
To enhance the surround sound effects, refer to the operating instructions of the amplifier (receiver) for correct
speaker setting location.
Note
After you have completed the connection, be sure to set "DOLBY DIGITAL" to "DOLBY DIGITAL" (page 30). If
your AV amplifier (receiver) has a DTS decoder, set "DTS" to "ON" (page 30). Otherwise, no sound or a loud noise
will come from the speakers.
25 26
1-5
. If your amplifier
C-1
.
C-2