Settings And Adjustments - Sony DVP-NC600 Service Manual

Operation Sound Effects
(Sound Feedback)
The player beeps when the following
operations are performed.
The default setting of the Sound Feedback
function is set to off.
Operation Operation
sound
Power is turned on One beep
Power is turned off Two beeps
H is pressed
One beep
X is pressed
Two beeps
Playback is stopped One long beep
Operation is not possible Three beeps
Controlling AV amplifiers (receivers)
with the remote
TV ?/1
1 2 3
Number
4 5 6
buttons
7 8 9
VOL +/–
0
1
Hold down TV ?/1, and enter your AV
amplifier's (receiver's) manufacturer's
code (see the table) using the number
buttons.
2
Release TV ?/1.
Code numbers of controllable AV
amplifiers (receivers)
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your AV amplifier
(receiver).
Manufacturer Code number
Sony 91, 89
Denon 84, 85, 86
Kenwood 92, 93
Onkyo 81, 82, 83
Pioneer 99
Sansui 87
Technics 97, 98
Yamaha 94, 95, 96
Controlling the AV amplifier (receiver)
You can change the volume of the AV
amplifier (receiver) using VOL +/–.
To set Sound Feedback
A
X
Power indicator
POWER
?/1
1 2 3
4 5 6
7 8 9
0
1
Press POWER on the player, then press
?/1 on the remote.
The power indicator lights up in green.
When there is a disc in the player, press
A and remove the disc. Then press A
again to close the disc tray.
2
Press and hold X on the player for more
than two seconds.
You will hear one beep and the Sound
Feedback function is turned on.
To turn off the Sound Feedback
function
When there is no disc in the player, press and
hold X on the player for more than two
seconds. You will hear two beeps and the
Sound Feedback function is turned off.
Controlling Your TV or AV
Amplifier (Receiver) with
the Supplied Remote
By adjusting the remote signal, you can
control your TV or AV amplifier (receiver)
with the supplied remote.
If you connect the player with an AV
amplifier (receiver), you can control the
volume with the supplied remote.
Notes
• Depending on the units being connected, you may
not be able to control your TV or AV amplifier
(receiver) using some of the buttons below.
• If you enter a new code number, the code number
previously entered will be erased.
• When you replace the batteries of the remote, the
code number may be reset to the default setting.
Reset the appropriate code number.
Controlling TVs with the remote
1 2 3
Number
4 5 6
buttons*
7 8 9
0
1
Hold down TV ?/1, and enter your TV's
manufacturer's code (see the table)
using the number buttons.
2
Release TV ?/1.
59 60

Settings and Adjustments

Using the Setup Display
By using the Setup Display, you can make
various adjustments to items such as picture
and sound. You can also set a language for
the subtitles and the Setup Display, among
other things. For details on each Setup
Display item see page 63 through 68. For an
overall list of Setup Display items, see page
77.
How to use the Setup Display
7 8
0
DISPLAY
1
Press DISPLAY on the remote when the
player is in stop mode.
The Control Menu Appears.
2
Press X/x to select
press ENTER.
The options for SETUP appear.
QUICK
QUICK
CUSTOM
RESET
61 62
1-14
Code number of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
Manufacturer Code
number
Sony (default) 01
Akai 04
AOC 04
Centurion 12
Coronado 03
Curtis-Mathes 12
Daytron 12
Emerson 03,04,14
Fisher 11
General Electric 06, 10
Gold Star 03,04,17
Hitachi 02,03
J. C. Penney 04,12
JVC 09
KMC 03
Magnavox 03,08,12
Marantz 04, 13
TV ?/1
MGA/Mitsubishi 04,12,13,17
NEC 04, 12
TV/VIDEO
VOL +/–
Controlling the TV
You can control your TV using the buttons
below.
By pressing You can
TV ?/1
Turn the TV on or off
VOL (volume) Adjust the volume of the TV
+/–
TV/VIDEO Switch the TV's input source
between the TV and other input
sources
* Use the number buttons only to enter the code
number of controllable TVs.
3
Press X/x to select "CUSTOM" and
press ENTER.
The Setup Display appears.
LANGUAGE SETUP
OSD:
DVD MENU:
AUDIO:
SUBTITLE:
4
Press X/x to select the setup item from
the displayed list: "LANGUAGE SETUP,"
"SCREEN SETUP," "CUSTOM SETUP,"
or "AUDIO SETUP." Then press ENTER.
The selected setup item appears.
9
Example: SCREEN SETUP
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
X/x
Selected item
ENTER
Setup items
5
Select an item using X/x, then press
ENTER.
The options for the selected item appear.
Example: TV TYPE
SCREEN SETUP
TV TYPE:
(SETUP) and
SCREEN SAVER:
BACKGROUND:
Manufacturer Code
number
Panasonic 06, 19
Philco 03, 04
Philips 08
Pioneer 16
Portland 03
Quasar 06, 18
Radio Shack 05, 14
RCA 04, 10
Sampo 12
Sanyo 11
Scott 12
Sears 07,10,11
Sharp 03,05,18
Sylvania 08, 12
Teknika 03,08,14
Toshiba 07
Wards 03,04,12
Yorx 12
Zenith 15
ENGLISH
ENGLISH
ORIGINAL
ENGLISH
4:3 LETTER BOX
ON
JACKET PICTURE
4:3 LETTER BOX
4:3 LETTER BOX
4:3 PAN SCAN
16:9
Options