SMART forfour Operating Instructions Manual page 215

!"#$%&$%'&#())*#+#,-.))/-0123456-789:%%;##<=4>=#?D##@4>>A%B6C#DE9#FG1'G&#D)).##/H*?#)/
Replacing the bulbs
Changing turn signal indicators and
front fog lamps*
The turn signal indicators and front fog
lamps share the same housing. If your car
is not equipped with front fog lamps,
there will be only the turn signal indica
tors in the housing.
Release the two retaining screws on the
lower edge of the cover.
Pull the cover off to the front.
9 12 Helpful hints
Changing turn signal indicators (A)
Simply pull the plug off the turn signal
indicator.
Insert the new turn signal indicator in
the same way.
Place the lights unit back into the nose
end of the car. Ensure that the guide
lug at the top and the guide pin at the
side are correctly located.
Screw the unit in securely.
>Note!
Have the turn signal indicators in the
outside mirrors checked regularly by a
qualified specialist workshop, e.g. a
smart center.
Changing front fog lamps* (B)
Remove the plug. Push the retaining
tongue upwards.
Twist the bulb holder to the left to re
move.
Insert the new H8 bulb.
> The H8 bulb is always supplied as a
component with a holder.
Place the lights unit back into the nose
end of the car. Ensure that the guide
lug is at the top and that the guide pin
at the side is correctly located.
Screw the unit in securely.