SMART forfour Operating Instructions Manual page 170

!"#$%&$%'&#())*#+#,-.))/-0123456-789:%%;##<=4>=#?/##@4>>A%B6C#DE9#FG1'G&#D)).##/H*?#)/
Press the protective cap over the lock.
> The ball head is protected against
unauthorised removal.
> Only with the key removed is it as
sured that the ball head is correctly
locked.
>Note!
Make a note of the key number. If the key
is ever lost, you can order a new one from
a smart center by quoting this number.
Adjusting fitting position
Insert the key in the lock on the ball
head.
Turn the key in the opposite direction
to the arrow.
> The lock is released.
Lift the handwheel off the ball head and
turn it in the direction of the arrow
until it engages.
> The red mark on the hand wheel is
aligned with the green mark on the
ball head.
> You can fit the ball head.
Trailer hitch*
Removing ball head
Remove the protective cap from the
lock on the handwheel.
Insert the key in the lock and turn it in
the opposite direction to the arrow.
Release the handwheel by pulling it out
sideways and turning it clockwise un
til it engages.
> The red mark on the hand wheel is
aligned with the green mark on the
ball head.
Pull off the ball head to the rear.
Press the stopper into the permanent
mounting on the car.
Place the ball head back in the luggage
compartment box beneath the cover in
the luggage compartment.
>Important!
The ball head can easily be fitted and re
moved by hand. Do not use any tools, as
this would damage the mechanism.
Loading up 7 19