LightSpeed Technologies Redcat Access User Manual page 24

MEDIA CONNECTOR CONTROLS
AND CONNECTIONS
1. TONE CONTROL: Adjusts the
audio tone, adding more bass
or treble for a more rich or crisp
sounds.
2. USB POWER INPUT: Plug the
micro USB end of the power cable
into this USB port.
3. REGISTRATION PUSHBUTTON
& LIGHT: Pushing the registration
button in conjunction with the
registration button on the Redcat
Access will cause the two units
to synchronize as an operating
system. The registration light goes
out and the link light is solid when
24
2
3
1
CONT'D
4
2
USB power adaptor and
charging cable
a link is established. This is only
used when adding or replacing a
Midea Connector.
4. TWO AUDIO OUTPUTS: 3.5mm
stereo jacks send audio signal
to external equipment such as a
recorder or an assistive listening
device like Lightspeed's 370
Personal FM System.
5. FOUR AUDIO INPUTS: Connect
standard audio devices to any
of the 3.5mm stereo inputs. A
provided cable allows connectivity
to RCA stereo outputs common on
DVD players and televisions.
5
2