SMC Networks SMCWUSB-N4 User Manual page 33

Using the SMC WLAN configuration tool, you can switch your Adapter from one operating
mode to another.
To switch the Adapter from Station mode to AP mode:
1. Insert the Adapter into the USB port on your computer.
2. Click AP mode at the top of the main screen (see Figure 3-1).
3. If the ICS Select WAN Adapter dialog box appears, use the top drop-down list to select a
WAN adapter. The bottom drop-down list is a read-only field that shows the name of your
Adapter.
4. Click OK.
Note: If the Adapter is not inserted into the computer's USB slot, an error messages indicates
it is impossible to switch to AP mode. If you receive this message, click OK to close the
message. Then insert the Adapter into the computer's USB port and click AP mode again.
Using the SMC WLAN Configuration Tool (Windows)
Figure 3-2. Example of Adapter in Station Mode
Figure 3-3. Example of Adapter in AP Mode
SMCWUSB-N4 300 Mbps Wireless USB Adapter User Manual
33