General Safety Warnings; Electrical Safety Warnings - Saber Compact ATD?80352 User Manual

General Safety Warnings:
WARNING:
The instructions and warnings contained in this manual should be read and understood before using
or operating this tool. Do not allow anyone to use or operate this tool until they have read this manual and have
developed a thorough understanding of how this tool works. Failure to observe any of the following instructions could
result in severe personal injury to tool user and bystanders, or cause damage to the tool and property. Keep this manual
for future reference.
Note:
The warnings and cautions discussed in this instruction manual cannot cover all possible conditions and
situations that may occur. It must be understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
WARNING:
Use safety equipment. Users and bystanders should use safety goggles or safety glasses with side
shields which comply with current national standards, or when needed, a face shield. Use an ANSI approved dust mask or
respirator when working around metal, wood, and chemical dusts and mists. This applies to all persons in the work area.
Also use non‐skid safety shoes, hardhat, gloves, dust collection systems, and hearing protection when appropriate.
WARNING:
Keep bystanders and children out of the work area while operating this tool.
WARNING:
Always keep your work area clean, uncluttered, and well lit. Cluttered or dark areas invite accidents
and injuries. DO NOT work on floor surfaces that are slippery.
WARNING:
Do not operate this tool if you are tired or under the influence of alcohol, drugs, or medications that
could affect your ability to use the tool properly.
WARNING:
Dress properly. Do not wear loose clothing or jewelery as they can be caught in moving parts. Wear
restrictive hair covering to contain long hair.
WARNING:
Do not reach over or across running machines. Keep proper footing and balance at all times. Non‐
skid footwear is recommended when working.
Electrical Safety Warnings:
WARNING:
Read all safety warnings and instructions. Failure to follow all warnings and instructions may result
in electric shock, fire and/or serious injury or death.
WARNING:
To reduce the risk of electric shock, DO NOT use in damp conditions, on wet surfaces, or expose to
rain. Do not plug in this tool or operate it with wet hands or while standing in water.
WARNING:
Always remove the charging cord from the electric outlet when making adjustments, changing parts,
cleaning or working on the tool.