Advertisement
Quick Links
PROFESSIONAL RECHARGEABLE MULTI‐HEAD LED LIGHT KIT
FEATURES:
•
Unique Design Offers Multiple Light Head Designs To Use With The Same Lithium‐Ion Rechargeable Battery Pack
•
Made of Super Tough Aircraft Grade Aluminum
•
Multiple Screw‐On Light Head Choices Allows The Right Light For The Right Job
•
IP54 Rated For Dust & Water Resistance
•
3‐4 Hour Run Time On Full Battery Charge
•
Automatic Charging Protection
KIT INCLUDES:
•
3.7V, 2,000mAh Battery Pack Base with Switch (ATD‐80314)
•
2‐Watt LED Light Head with Focusing Beam (ATD‐80310)
•
1‐Watt LED 14.5" Long Flexible Inspection Light Head (ATD‐80312)
•
Battery Pack Recharging Base With LED Charge Indicator & Magnetic Base (ATD‐80315)
•
5V, 0.8A Wall Charger (ATD‐80316)
•
40.5" Long USB Charging Cable
•
Custom Carrying/Storage Pouch (ATD‐80317)
OPTIONAL ACCESSORIES AVAILABLE:
•
2‐Watt COB LED Work Light Head (ATD‐80311)
•
UV Leak Detection Head (ATD‐80313)
California Prop 65 WARNING:
This product contains chemicals including lead, known to the State of California to cause cancer, birth defects, or other
reproductive harm. Wash hands after handling.
ATD‐80300
USER'S MANUAL
Advertisement
Related Manuals for Saber Compact II ATD-80300
Summary of Contents for Saber Compact II ATD-80300
- Page 1 ATD‐80300 PROFESSIONAL RECHARGEABLE MULTI‐HEAD LED LIGHT KIT USER’S MANUAL FEATURES: • Unique Design Offers Multiple Light Head Designs To Use With The Same Lithium‐Ion Rechargeable Battery Pack • Made of Super Tough Aircraft Grade Aluminum • Multiple Screw‐On Light Head Choices Allows The Right Light For The Right Job • IP54 Rated For Dust & Water Resistance • 3‐4 Hour Run Time On Full Battery Charge • Automatic Charging Protection KIT INCLUDES: • 3.7V, 2,000mAh Battery Pack Base with Switch (ATD‐80314) • 2‐Watt LED Light Head with Focusing Beam (ATD‐80310) • 1‐Watt LED 14.5” Long Flexible Inspection Light Head (ATD‐80312) • Battery Pack Recharging Base With LED Charge Indicator & Magnetic Base (ATD‐80315) • 5V, 0.8A Wall Charger (ATD‐80316) • 40.5” Long USB Charging Cable •...
-
Page 2: General Safety Warnings
General Safety Warnings: WARNING: The instructions and warnings contained in this manual should be read and understood before using or operating this tool. Do not allow anyone to use or operate this tool until they have read this manual and have developed a thorough understanding of how this tool works. Failure to observe any of the following instructions could result in severe personal injury to tool user and bystanders, or cause damage to the tool and property. Keep this manual for future reference. Note: The warnings and cautions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. WARNING: Use safety equipment. Users and bystanders should use safety goggles or safety glasses with side shields which comply with current national standards, or when needed, a face shield. Use an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists. This applies to all persons in the work area. Also use non‐skid safety shoes, hardhat, gloves, dust collection systems, and hearing protection when appropriate. WARNING: Keep bystanders and children out of the work area while operating this tool. WARNING: Always keep your work area clean, uncluttered, and well lit. Cluttered or dark areas invite accidents and injuries. DO NOT work on floor surfaces that are slippery. WARNING: Do not operate this tool if you are tired or under the influence of alcohol, drugs, or medications that could affect your ability to use the tool properly. WARNING: Dress properly. Do not wear loose clothing or jewelery as they can be caught in moving parts. Wear restrictive hair covering to contain long hair. WARNING: Do not reach over or across running machines. Keep proper footing and balance at all times. Non‐skid footwear is recommended when working. Cordless Electrical Safety Warnings: ... - Page 3 WARNING: Care should be taken to arrange the charging cord so it will not be stepped on, tripped over, or otherwise subjected to damage or stress. WARNING: Never attempt to plug in or operate equipment with defective or damaged wires, power cord or power cord plug. Have any defective or damaged parts replaced immediately by qualified personnel. WARNING: Avoid body contact with electrically grounded surfaces. There is an increased risk of electric shock if your body is grounded. WARNING: If the work area is not equipped with a permanently installed Ground Fault Circuit Interrupter outlet (GFCI), use a plug‐in GFCI between the power tool or extension cord and the power receptacle. Be environmentally conscious : Dispose of batteries as mandated by your state or local laws. Do not dispose of batteries in a fire. This may result in an explosion. For more information on recycling batteries, call toll‐ free (800) 822‐8837. ATD‐80300 Specific Safety Instructions: WARNING: Read all instructions before using WARNING: For indoor use only – do not use in or around, tubs, showers, sinks, pools, hot tubs, or in a wet environment ...
- Page 4 Oper To use, plug the unit into any 110-120 VAC power source, such as a wall receptacle. Let the unit fully charge un l the • green indicators on the charger base turn on. Charge this light every month if not in constant use, and a er each use if it is used o en to insure longevity. •...
-
Page 5: Available Accessories
ATD-80300 ATD-80314 ATD-80310 ATD-80315 ATD-80316 ATD-80312 ATD-80317 AVAILABLE ACCESSORIES (NOT INCLUDED IN KIT) ATD-80311 ATD-80313 ORDERING PART# PART DESCRIPTION ATD-80310 2W COB LED LIGHT HEAD ATD-80312 1W FLEXIBLE INSPECTION LIGHT HEAD ATD-80314 BATTERY PACK ATD-80315 CHARGER BASE ATD-80316 AC WALL CHARGER AND USB CABLE ATD-80317 POUCH OPTIONAL AVAILABLE ACCESSORIES...