Saber Compact ATD?80352 User Manual page 4

Operating Instructions:
•
To use, plug the unit into any 110-120 VAC power source, such as a wall receptacle.
•
Let the unit fully charge until the green indicator on the charger turns on before use.
•
Charge this light every month if not in constant use, and after each use if it is used often to insure longevity.
•
Press the switch at the handle to turn unit on, press the switch again to turn it off.
•
The hooks can be adjusted by simply pulling out on them and affixing to whatever surface you like,
such as a car hood. (Up to 70" wide)
•
Once your light is in place, it can be rotated to the desired position by simply twisting the light. You
will hear ratcheting "clicks" as you rotate it.