CA Prop 65 Warning:
WARNING:
This product contains chemicals including lead, known to the State of California to
cause cancer, birth defects, or other reproduc ve harm. Wash hands after handling.
General Safety Warnings:
WARNING:
The instruc ons and warnings contained in this manual should be read and
understood before using or opera ng this tool. Do not allow anyone to use or operate this tool un l they
have read this manual and have developed a thorough understanding of how this tool works. Failure to
observe any of the following instruc ons could result in severe personal injury to tool user and
bystanders, or cause damage to the tool and property. Keep this manual for future reference.
Note:
The warnings and cau ons discussed in this instruc on manual cannot cover all possible
condi ons and situa ons that may occur. It must be understood by the operator that common sense and
cau on are factors which cannot be built into this product, but must be supplied by the operator.
WARNING:
Use safety equipment. User and bystanders should use safety goggles or safety
glasses with side shields which comply with current na onal standards, or when needed, a face shield.
Use an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts
and mists. This applies to all persons in the work area. Also use non-skid safety shoes, hardhat, gloves,
dust colle on systems, and hearing protec on when appropriate.
WARNING:
Keep bystanders and children out of the work area while opera ng this tool.
WARNING:
Always keep your work area clean, unclu ered, and well lit. Clu ered or dark areas
invite accidents and injuries. DO NOT work on oor surfaces that are slippery.
WARNING:
Do not operate this tool if you are red or under the in uence of alcohol, drugs, or
medica ons that could a ect your ability to use the tool properly.
WARNING:
Dress properly. Do not wear loose clothing or jewelery as they can be caught in
moving parts. Wear restri ve hair covering to contain long hair.
WARNING:
Do not reach over or across running machines. Keep proper foo ng and balance at
all mes. Non-skid footwear is recommended when working.
Need help?
Do you have a question about the ATD-80050 and is the answer not in the manual?